Configuring Ip Profiles - AudioCodes Mediant 4000 SBC User Manual

CHAPTER 19 Coders and Profiles

Configuring IP Profiles

The IP Profiles table lets you configure up to 125 IP Profiles. An IP Profile is a set of parameters
with user-defined settings relating to signaling (e.g., SIP message terminations such as REFER)
and media (e.g., coder type). An IP Profile can later be assigned to specific IP calls (inbound and/or
outbound). Thus, IP Profiles provide high-level adaptation when the device interworks between
different IP entities, each of which may require different handling by the device. This can include,
for example, transcoding or even transrating (of packetization time). For example, if a specific IP
entity uses the G.711 coder only, you can configure an IP Profile with G.711 for this IP entity.
To use your IP Profile for specific calls, you need to assign it to any of the following:
■ IP Groups - see
Many of the parameters in the IP Profiles table have a corresponding "global" parameter. For calls
that are not associated with any IP Profile, the settings of the "global" parameters are applied.
You can also use IP Profiles when using a Proxy server (when the
AlwaysUseRouteTable parameter is set to 1).
The following procedure describes how to configure IP Profiles through the Web interface. You can
also configure it through ini file [IPProfile] or CLI ( configure voip > coders- and-
profiles ip-profile).
➢
To configure an IP Profile:
1. Open the IP Profiles table (Setup menu > Signaling & Media tab > Coders & Profiles folder
> IP Profiles).
2. Click New; the following dialog box appears:
3. Configure an IP Profile according to the parameters described in the table below.
4. Click Apply.
Parameter
General
'Index'
[IpProfile_Index]
'Name'
profile-name
[IpProfile_ProfileName]
Configuring IP Groups
Table 19-5: IP Profiles Table Parameter Descriptions
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when
associating the row in other tables.
The valid value is a string of up to 40 characters.
Description
- 395 -
Mediant 4000 SBC | User's Manual