Dhcp Server Manual Binding - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Parameter
Class State
Class Name
Click the Apply button to accept the changes made.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.
Click the Add/Edit button to view more details regarding the specific entry.
After clicking the Add/Edit button link, the following window will appear:
The fields that can be configured are described below:
Parameter
Class Name
Option
Type
Click the Add button to add a new entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.

DHCP Server Manual Binding

An address binding is a mapping between the IP address and MAC address of a client. The IP address of a client
can be assigned manually by an administrator or assigned automatically from a pool by a DHCP server. The
dynamic binding entry will be created when an IP address is assigned to the client from the pool network's address.
To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Manual Binding as
shown below:
Description
Specifies the DHCP Server Class' state here.
Enable - Specifies that the DHCP Server Class feature will be enabled.
Disable - Specifies that the DHCP Server Class feature will be enabled.
Enter the DHCP class name used here. This name can be up to 12 characters long.
Figure 9-14 DHCP Server Class Settings window (Add/Edit)
Description
Displays the DHCP class name used here.
Specifies the Option index that will be added. Options to choose from are 60 and 82.
Specifies the DHCP class string or HEX type used.
String - Enter the character string used here. This string can be up to 255 characters
long.
Hex - Enter the hexadecimal value of the string used here. This value can be up to
255 characters long.
316