Vlan > Voice Vlan > Voice Device List; Vlan > Auto Surveillance Vlan > Auto Surveillance Properties - D-Link DGS-1210 Series Manual

4 Web-based Switch Configuration
Auto Detection: Switch will add ports to the voice VLAN automatically if it detects the device OUI matches
the Telephony OUI configured in Voice VLAN OUI Setting page. Use the drop-down menu to enable or
disable the OUI auto detection function. The default is Disabled
Tagged / Untagged: Tagged or untagged the ports.
Click Apply to implement changes made and Refresh to refresh the voice vlan table.
VLAN > Voice VLAN > Voice Device List
The Voice Device List page displays the information of voice device detected or created.
Select a port or all ports and click Search to display the Voice Device information in the table.
VLAN > Auto Surveillance VLAN > Auto Surveillance Properties
Video traffic demands low latency (high priority) in real-time transmission which serious effect the quality of
pictures and quality of sounds. Auto Surveillance VLAN feature helps user to place the qualified traffic into
corresponding VLAN group with high priority.
Figure 4.56 – VLAN > Auto Surveillance VLAN > Auto Surveillance Properties
Global Settings: To configure the related auto surveillance VLAN global settings.
Auto Surveillance VLAN: To enable or disable the auto surveillance VLAN state.
Surveillance VLAN ID: Specifies the surveillance VLAN ID. The range is from 2 to 4094.
Note: Voice VLAN has higher priority than any
other features even QoS. Therefore the voice
traffic will be operated according to Voice VLAN
setting and not impacted by QoS feature.
Note: It is recommended setting the highest
priority for Voice VLAN to guarantee the quality of
VoIP traffic.
Figure 4.55 – VLAN > Voice VLAN > Voice Device List
5 5
5 5
D-Link Smart Managed Switch User Manual