Auto Surveillance Vlan - D-Link DGS-1510 Series Web Ui Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
VLAN Mode
Acceptable Frame
Ingress Checking
Native VLAN
VID
Action
Allowed VLAN Range
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.

Auto Surveillance VLAN

Auto Surveillance Properties
This window is used to configure the auto surveillance VLAN global settings and display the ports
surveillance VLAN information.
To view the following window, click L2 Features > VLAN > Auto Surveillance VLAN > Auto
Surveillance Properties, as shown below:
Description
Select the VLAN mode option here. Options to choose from are
Access, Hybrid, and Trunk.
Select the acceptable frame behavior option here. Options to choose
from are Tagged Only, Untagged Only, and Admit All.
After selecting Trunk as the VLAN Mode the following parameter will
be available. Select to enable or disable the ingress checking function.
Tick the check box to enable the native VLAN function. Also select if
this VLAN supports Untagged or Tagged frames.
After ticking the Native VLAN check box, this option will be available.
Enter the VLAN ID used for this configuration here. This value must be
between 1 and 4094.
Select the action that will be taken here. Options to choose from are
All, Add, Remove, Except, and Replace.
Enter the allowed VLAN range information here.
95