4 Web-based Switch Configuration
Configuration > Voice VLAN > Voice Device List
The Voice Device List page displays the information of Voice VLAN.
Select a port or all ports and click Search to display the Voice Device information in the table.
Configuration > Voice VLAN > LLDE-MED Voice Device List
The Voice Device List page displays the information of voice device learned from LLDP-MED protocol. The
device information is retrieved from Network Policy contained in LLDP-MED packets.
Figure 4.56 - Configuration > Voice VLAN > LLDP-MED Voice Device List
Configuration > Auto Surveillance VLAN > Auto Surveillance Properties
The Auto Surveillance Properties page allows user to configure and display the ports surveillance VLAN
settings and information.
Figure 4.57 – VLAN > Auto Surveillance VLAN > Auto Surveillance Properties
Global Settings: To configure the related auto surveillance VLAN global settings.
Auto Surveillance VLAN: To enable or disable the auto surveillance VLAN state.
Surveillance VLAN ID: Specifies the surveillance VLAN ID. The range is from 2 to 4094.
Surveillance VLAN CoS: Specifies the priority of the surveillance VLAN. The range is from 0 to 7.
Tagged Uplink/Downlink Port: Specifies the port or ports to be tagged uplink port or downlink port for the
Auto Surveillance VLAN.
Aging Time (1-65535): Specifies the aging time of surveillance VLAN. The range is from 1 to 65535 minutes.
The default value is 720 minutes. The aging time is used to remove a port from surveillance VLAN if the port
Figure 4.55 – VLAN > Voice VLAN > Voice Device List
4
4
9
9
D-Link DGS-2000 Series Ethernet Switch User Manual