Auto Surveillance Vlan - D-Link DGS-3130 Series Web Ui Reference Manual

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Click the Delete button to remove the specific entry or to remove the sub-VLAN from the super VLAN.
Click the IP Range List
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the IP Range List
The fields that can be configured are described below:
Parameter
Action
Start IP Address
End IP Address
Click the Back button to return to the previous page.
Click the Apply button to accept the changes made.

Auto Surveillance VLAN

Auto Surveillance Properties
This window is used to display and configure the auto surveillance VLAN properties.
link to add an IP range to the sub-VLAN.
link, the following page will be available.
Figure 5-28 Super VLAN (IP Range List) Window
Description
Select the action that will be taken here. Options to choose from are Add and
Remove.
Enter the starting IP address in the range of this sub-VLAN here.
Enter the ending IP address in the range of this sub-VLAN here.
116