DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
D-Link Discovery Protocol
This window is used to display and configure the D-Link Discovery Protocol (DDP) settings.
To view the following window, click Management > D-Link Discovery Protocol, as shown below:
The fields that can be configured in D-Link Discovery Protocol are described below:
Parameter
D-Link Discovery Protocol
State
Report Timer
Click the Apply button to accept the changes made.
The fields that can be configured in DDP Port Settings are described below:
Parameter
Unit
From Port - To Port
State
Click the Apply button to accept the changes made.
SMTP Settings
This window is used to display and configure the Simple Mail Transfer Protocol (SMTP) settings.
Figure 4-84 D-Link Discovery Protocol Window
Description
Select to globally enable or disable the DDP feature here.
Select the report timer value here. This is used to configure interval between
two consecutive DDP report messages. Options to choose from are 30, 60, 90,
120 seconds, or Never. Selecting Never instructs the Switch to stop sending
report messages.
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select to enable or disable the DDP feature on the specified port(s) here.
92