YASKAWA SGM7D-30F Product Manual page 376

Parameter
Name
No.
Input Signal Selections
2
5
/DEC (Origin Return Deceleration Switch Input) Signal Allocation

n. X
Pn511
/EXT1 (External Latch Input 1) Signal Allocation
 
n. X
/EXT2 (External Latch Input 2) Signal Allocation
 
n. X
/EXT3 (External Latch Input 3) Signal Allocation

n.X
4.2 FT82 SERVOPACK with MECHATROLINK-II Communications References
Setting Setting
Range Unit
0000h to
FFFFh
0 Active when CN1-13 input signal is ON (closed).
1 Active when CN1-7 input signal is ON (closed).
2 Active when CN1-8 input signal is ON (closed).
3 Active when CN1-9 input signal is ON (closed).
4 Active when CN1-10 input signal is ON (closed).
5 Active when CN1-11 input signal is ON (closed).
6 Active when CN1-12 input signal is ON (closed).
7 The signal is always active.
8 The signal is always inactive.
9 Active when CN1-13 input signal is OFF (open).
A Active when CN1-7 input signal is OFF (open).
B Active when CN1-8 input signal is OFF (open).
C Active when CN1-9 input signal is OFF (open).
D Active when CN1-10 input signal is OFF (open).
E Active when CN1-11 input signal is OFF (open).
F Active when CN1-12 input signal is OFF (open).
0 to 3 The signal is always inactive.
4 Active when CN1-10 input signal is ON (closed).
5 Active when CN1-11 input signal is ON (closed).
6 Active when CN1-12 input signal is ON (closed).
D Active when CN1-10 input signal is OFF (open).
E Active when CN1-11 input signal is OFF (open).
F Active when CN1-12 input signal is OFF (open).
7 to C The signal is always inactive.
The allocations are the same as the /EXT1 (External Latch Input 1) signal allo-
0 to F
cations.
The allocations are the same as the /EXT1 (External Latch Input 1) signal allo-
0 to F
cations.
Continued from previous page.
Default Applicable
Setting Motors Enabled
– 6543h All
When Classi- Refer-
fication ence
After
Setup *1
restart
Continued on next page.
4-51
4