YASKAWA SGM7D-30F Product Manual page 377

4.2 FT82 SERVOPACK with MECHATROLINK-II Communications References
Parameter
No.
Pn512
Pn514
4-52
Name
Output Signal Inverse
2
Settings
Output Signal Inversion for CN1-1 and CN1-2 Terminals

n. X 0 The signal is not inverted.
1 The signal is inverted.
Output Signal Inversion for CN1-23 and CN1-24 Terminals
 
n. X 0 The signal is not inverted.
1 The signal is inverted.
Output Signal Inversion for CN1-25 and CN1-26 Terminals
 
n. X 0 The signal is not inverted.
1 The signal is inverted.

n.X Reserved parameter (Do not change.)
Output Signal Selec-
2
tions 4

n. X Reserved parameter (Do not change.)
 
n. X Reserved parameter (Do not change.)
/PM (Preventative Maintenance Output) Signal Allocation
0 Disabled (the above signal output is not used).
1 Output the signal from the CN1-1 or CN1-2 output terminal.
 
n. X
2 Output the signal from the CN1-23 or CN1-24 output terminal.
3 Output the signal from the CN1-25 or CN1-26 output terminal.
4 to 6 Reserved setting (Do not use.)

n.X Reserved parameter (Do not change.)
Setting Setting Default
Range Unit Setting
0000h to
– 0000h
1111h
0000h to
– 0000h
0666h
Continued from previous page.
Applicable When Classi-
Motors Enabled fication
After
All Setup
restart
After
All Setup
restart
Reference
Continued on next page.
Refer-
ence
*1
–
*1