YASKAWA SGM7D-30F Product Manual page 356

*1.
Refer to the following manual for details.
Σ-7-Series Σ-7S SERVOPACK with Analog Voltage/Pulse Train References Product Manual (Manual No.: SIEP
S800001 26)
*2.
Set a percentage of the motor rated torque.
*3.
These parameters are for SERVOPACKs with a Safety Module. Refer to the following manual for details.
Σ-V-Series/Σ-V-Series for Large-Capacity Models/Σ-7-Series User's Manual Safety Module (Manual No.: SIEP
C720829 06)
*4.
Normally set this parameter to 0. If you use an External Regenerative Resistor, set the capacity (W) of the Exter-
nal Regenerative Resistor.
*5.
The upper limit is the maximum output capacity (W) of the SERVOPACK.
*6.
These parameters are for SERVOPACKs with the dynamic brake option. Refer to the following manual for details.
Σ-7-Series AC Servo Drive Σ-7S/Σ-7W SERVOPACK with Hardware Option Specifications Dynamic Brake Prod-
uct Manual (Manual No.: SIEP S800001 73)
*7.
The SGLFW2 is the only Yaskawa Linear Servomotor that supports this function.
*8.
Enabled only when Pn61A is set to n.2 or n.3.
4.1 FT82 SERVOPACKs with Analog Voltage/Pulse Train References
4
4-31