Display The Kernel Route Configuration; Display System Log And Event Log Messages; Clear Statistics; Antenna Alignment - Proxim Tsunami MP-8100 Series Reference Manual

1.5.8 Display the Kernel Route Configuration

System Name# show kernel-route-tbl
Kernel IP routing table
Destination
192.168.2.0

1.5.9 Display System Log and Event Log Messages

System Name# show syslog-messages
Jan 1 00:00:54 System Name syslog.info syslogd started: BusyBox 1.10.0
Jan 1 00:03:04 System Name user.crit monitord: Took Backup of current configuration
System Name# show
00d:00h:00m:21s-->Alert Msg:Device initialized with Firmware Version 1.0.0 B206262
Timestamp 26-Jun-2009 (IST) 11:51:45 AM
00d:00h:00m:23s-->Alert Msg:Device is in Bridge Mode
00d:00h:00m:52s-->Alert Msg:System Initialization Successful
00d:00h:03m:05s-->Critical Msg:Took Backup of current configuration

1.5.10 Clear Statistics

System Name#
System Name# clear ?
Possible completions:
eventlog-messages
syslog-messages
To Clear Eventlog Messages:
System Name# clear eventlog-messages
To Clear Syslog Messages:
System Name# clear syslog-messages

1.5.11 Antenna Alignment

System Name# aad enable
Worp Link is down. So Audible Antenna Alignment will not start....!
System Name#
Tsunami MP-8100 Reference Manual
Gateway Genmask
* 255.255.255.0
eventlog-messages
Clear the Event log Information
Clear the system log Information
Flags Metric Ref Use Iface
U 0 0 0 br0
Command Line Interface
67