System; Network - Proxim ORiNOCO AP-800 Software Management Manual

5.1 System

The System feature enables you to configure system specific information. Navigate to CONFIGURATION > System. The
System screen appears.
Tabulated below are 'System' parameters and the method to configure the configurable parameters:
Parameter
System Name
Network Mode
Click OK and COMMIT, to save the configured parameters.

5.2 Network

The Network feature displays the network specific information of the device.
To view the network mode, navigate to CONFIGURATION > Network. The Network Configuration screen appears.
The device supports only Bridge mode.
5.2.1 IP Configuration
The IP Configuration feature enables you to configure the TCP/IP settings of the device on a network. Navigate to
CONFIGURATION > Network > IP Configuration. The Network IP Configuration screen appears.
®
ORiNOCO 802.11n Access Points - Software Management Guide
Figure 5-1 System
Specifies the name assigned to the device. To assign a name to the device, enter a name in
the System Name box. You can enter a name of maximum 64 characters.
Specifies the network mode of the device. The device supports only Bridge mode.
Figure 5-2 Network Configuration
Description
Device Configuration
28