Table of Contents
Advertisement
Device Management
5.1 System
To configure the device information, Inventory Management information, and licensed information navigate to
Management > System.
5.1.1 Information
In the Information tab, view and configure the following parameters:
•
System Up-Time: The operational time of the device since its last reboot.
•
System Description: It includes device name, current version of the firmware and current build number.
•
System Name: The name assigned to the device.
•
Contact: The contact information (Email id, Phone number, and Location) of the person administering the device.
•
Email: The email address of the person administering the device.
•
Phone Number: The phone number of the person administering the device.
•
Location: The location where the device is installed.
•
GPS Longitude/Latitude/Altitude: The longitude/latitude/altitude at which the device is installed.
•
GPS Status Enable/Disable: Enable this option to get the GPS status of the device.
:
• Connect an External "Passive GPS Antenna" to get the GPS data after enabling the GPS status.
• GPS connectivity is only available with Edge 1015 and 1025 series.
After configuring the required parameters, click OK and then Commit.
5.1.2 Inventory Management
To view the system inventory information, navigate to Management > System Inventory Management.
By default, the components information is auto-generated by the device. This information is standard and is used only for
reference purpose. Click Refresh, to view the updated System Inventory Management information.
: Wireless Card 2 is applicable only to dual-radio device.
5.1.3 License Information
Licensing is one of the most important components in an enterprise class device which typically has a feature-based pricing
model. Licensing allows the device to operate as intended and prevents anyone tempering with the device feature set.
To view the license information, navigate to Management > System > License Information.
: The Input bandwidth indicates the data received on the wireless interface and output bandwidth indicates the data
sent on the wireless interface.
5.1.3.1 License Upgrade Procedure
To obtain additional bandwidth (larger channel, higher throughput limit), upgrade the License by retrieving the license
information (License Info file with .lic extension) from the device. For more details, refer
Contact Proxim Sales Representative to purchase a license upgrade. Refer to the Technical Note available on
http://www.proxim.com/support
Device Management Guide
to generate a unique license file for your device.
Retrieve from
Device.
5
27
Advertisement
Table of Contents
