Product Package; System Requirements - Proxim ORiNOCO AP-700 User Manual

Getting Started

Product Package

Each AP-700 comes with the following:
• AP-700 unit (with integrated 802.11a/b/g radio, and Active Ethernet)
• Power adapter
• One ceiling or wall mounting plate
• Security cover
• One Installation CD-ROM that contains the following:
– Software Installation Wizard
– ScanTool
– Solarwinds TFTP software
– MIBs
– HTML Help
– this user's guide in PDF format
• One Access Point Quick Start Flyer
If any of these items are missing or damaged, please contact your reseller or Technical Support (see Technical
Support for contact information).

System Requirements

To begin using an AP, you must have the following minimum requirements:
• A 10Base-T Ethernet or 100Base-TX Fast Ethernet switch or hub or cross-over Ethernet cableAt least one of the
following IEEE 802.11-compliant devices:
– An 802.11a, 802.11b, or 802.11b/g client device
• A computer that is connected to the same IP network as the AP and has one of the following Web browsers
installed:
– Microsoft Internet Explorer 6 with Service Pack 1 or later and patch Q323308
– Netscape 6.1 or later
(The computer is required to configure the AP using the HTTP interface.)
19