Configuration Parameters; Basic Settings; Ap Name - Proxim Harmony 802.11b User Manual

The first time a Harmony 802.11b Access Point is connected to the network, the AP
Controller will automatically configure the Access Point using the AP AutoConfigure
Default settings.
In addition, a Harmony 802.11b Access Point may be manually configured via the
Harmony system's Web browser interface. Refer to the Harmony Access Point
Controller Model 7560 User's Guide for information on how to access the Web
browser interface.
This chapter describes the configuration parameters for a Harmony 802.11b Access
Point.
You may configure the following parameters for a Harmony 802.11b Access Point
using the Web browser interface:

Basic Settings

Security Settings
Advanced Settings
Each of these options is discussed in detail below.
Basic Settings
The Basic Settings tab allows you to configure the following parameters.

AP Name

You can assign a name to the Harmony 802.11b Access Point. The AP Name cannot
exceed 63 characters. The AP Controller assigns an AP Name to each Access Point
that it automatically detects and configures. By default, the AP Name is the device's
physical address.

4. Configuration Parameters

17