Show Running-Config; Show Sysinfo - D-Link DWL-8500AP Command Reference Manual

If you enter the
interface <slot/port>
Status fields, the following field appears:
VLAN ID
The following information displays if you enter the
Dynamic Address count Number of MAC addresses in the forwarding database that were
Static Address (User-defined) count Number of MAC addresses in the forwarding database
Total MAC Addresses in use Number of MAC addresses currently in the forwarding data-
Total MAC Addresses available Number of MAC addresses the forwarding database can

show running-config

Use this command to display or capture the current setting of different protocol packages
supported on the switch. This command displays or captures commands with settings and
configurations that differ from the default value. To display or capture the commands with
settings and configurations that are equal to the default value, include the
Show running-config does not display the User Password, even if you set one
NOTE:
different from the default.
The output is displayed in script format, which can be used to configure another switch with
the same configuration. If the optional
of ".scr", the output is redirected to a script file.
If you issue the
NOTE:
access to the switch through remote connections (such as Telnet) is suspended
while the output is being generated and displayed.
Format
Mode

show sysinfo

This command displays switch information.
Format
Mode
Switch Description Text used to identify this switch.
GMRP Learned—The value of the corresponding was learned via GMRP and
applies to Multicast.
Other—The value of the corresponding instance does not fall into one of the
other categories.
The VLAN on which the MAC address was learned.
automatically learned.
that were manually entered by a user.
base.
handle.
<scriptname>
show running-config
show running-config [all | <scriptname>]
Privileged EXEC
show sysinfo
Privileged EXEC
parameter, in addition to the MAC Address and
parameter:
count
is provided with a file name extension
command from a serial connection,
System Information and Statistics Commands
6 Utility Commands
option.
[all]
267