Show Firmware Information; Show Config - D-Link DGS-1210/ME series Reference Manual

show firmware information

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

show config

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1210-28P/ME:5# show config current_config
Command: show config current_config
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Used to display the firmware section information.
show firmware information
The show firmware information command is used to display the
firmware section information.
None.
None.
DGS-1210-28P/ME:5# show firmware information
Command: show firmware information
Current : image one
Configured : image one
IMAGE ONE:
Version : 6.11.B037
Size : 12322966 Bytes
Updated Time : 01/01/2014 00:07:14
From : 172.21.45.101
User : Anonymous (web)
IMAGE TWO:
Version : 6.11.B037
Size : 13071144 Bytes
Updated Time : 01/01/2014 00:05:17
From : 10.90.90.97
User : Anonymous (web)
DGS-1210-28P/ME:5#
Used to display the current or saved version of the configuration
settings of the Switch.
show config [current_config | config_in_nvram config_id
<value 1-2> {[begin | exclude | include] <string 80>}
The show config command is used to display all the configuration
settings that are saved to NV RAM or display the configuration
settings as they are currently configured. Use the keyboard to list
settings one line at a time (Enter), one page at a time (Space) or
view all (a).
None.
Only Administrator -level users can issue this command.
114