Show Config - D-Link DGS-1100-16/ME Reference Manual

Description
Parameters
Restrictions
Example usage:
To display the Switch information:

show config

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the configuration:
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
The show switch command displays information about the Switch
settings, including Device Type, MAC Address, IP configuration,
Hardware/Software version, System
Network configuration.
None.
None.
DGS-1100-24P/ME:admin#show switch
Command: show switch
Device Type : DGS-1100-24/ME Gigabit Metro Access Switch
MAC Address : ec-22-80-40-08-f1
IP Address : 10.90.90.90 (Manual)
VLAN Name : VLAN0001
Subnet Mask : 255.0.0.0
Default Gateway
Boot PROM Version : Build 1.00.002
Firmware Version
Hardware Version
System Name : SWITCH
System Location :
System Contact
Spanning Tree
IGMP Snooping : Disabled
MLD Snooping
TELNET
SNMP : Disabled
SNTP : Disabled
DGS-1100-24P/ME:admin#
To display the current configuration settings of the Switch.
show config current_config
The show config command is used to list the current status of the
configuration settings of the Switch.
current_config − Display system configuration from the software
database, i.e. the current system setting.
None.
: 0.0.0.0
: Build 1.00.L001
: B1
:
: Disabled
: Disabled
: Enabled (TCP 23)
21
information, and Switch