Show Running-Config; Show Startup-Config - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands
2.2.7

show running-config

To show the configuration information current device system is running, execute the
privileged user command show running-config.
show running-config
Command
mode
2.2.8

show startup-config

To view the configuration of device stored in the Non Volatile Random Access Memory
(NVRAM), execute the privileged user command show startup-config.
show startup-config
Command
mode
Usage
guidelines
Chapter 2 Switch Management Configuration Commands
Parameter Description
detail Show the source of system clock.
Privileged mode
This command is used to view current system clock, the detail option
will show the source of the system clock.
The example below is an execution result of the
command:
DES-7210# show clock detail
clock: 2003-3-17 10:27:21
Clock read from calendar when system boot.
Command Description
clock set Set the system clock.
Privileged mode.
Privileged mode.
The configuration of device stored in the NVRAM is that executed
when the device is startup.
show clock
2-17