Voice Gateway Using Proxy Server; Wan Interface Configuration - AudioCodes M500Li Configuration Manual

2. Voice Gateway using Proxy Server

2 Voice Gateway using Proxy Server
This example scenario describes how to route calls when the Voice Gateway configured to
work using a Proxy Server and FXS ports (Basic configuration).
Figure 2-1: Example of Voice Gateway using SIP Proxy and FXS Ports
2.1

WAN Interface Configuration

This section describes the WAN Interface configuration of the Voice Gateway.
To configure WAN IP address:
◼ Open the WAN Interface page (Setup menu > IP NETWORK tab > CORE ENTITIES folder >
WAN Interface).
- 8 -
M500Li Analog VoIP Gateway