Adjusting The Position Of The Fixing Web Solenoid (Sl9); New Fixing Web; Existing Fixing Web - Canon iR5000 Service Manual

4.14 Adjusting the Position of the Fixing Web Solenoid (SL9)

4.14.1 New Fixing Web

Adjust the position for the solenoid using the screw [2] so that the distance of travel of the
drive lever [1] is 8.6 mm.

4.14.2 Existing Fixing Web

Before removing the solenoid, take note of the position [A] of the drive lever when the
solenoid turns on. After replacing the solenoid, adjust its position using the screw [2] so that
the drive lever [1] will be positioned as it was before replacement when the solenoid turns
on.
COPYRIGHT © 2000 CANON INC.
CHAPTER 3 STANDARDS AND ADJUSTMENTS
[2]
F03-414-01
[2]
F03-414-02
2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
[1]
8.6mm
[1]
A
3-19 T