Factory Defaults; Procedural Notes - HP storageworks director 2/140 Service Manual

Repair Information

Factory Defaults

Table 21
addresses.
Table 21: Factory-set Defaults
Customer password
Maintenance password
IP address
Subnet mask
Gateway address

Procedural Notes

Note:
on your server and workstation. The title bars have been removed and the fields may
contain data that does not match the data seen on your system.
The following procedural notes are referenced in applicable repair procedures.
The notes do not necessarily apply to all procedures in the chapter.
1. Before performing a repair procedure, read the procedure carefully and
2. When performing procedures described in this chapter, follow all electrostatic
3. After completing steps of a detailed procedure that is referenced from another
4. After completing a FRU replacement procedure, extinguish the amber system
162
lists the defaults for the passwords and IP, subnet, and gateway
Item
HAFM and Element Manager screens in this manual may not match the screens
thoroughly to familiarize yourself with the information and reduce the
possibility of problems or customer down time.
discharge (ESD) procedures, WARNING and CAUTION statements, and
statements listed in the preface of this manual.
procedure, return to the initial (referencing) procedure and continue to the
next step of that procedure.
error light-emitting diode (LED) on the bezel at the top front of the director.
Default
password
level-2
10.1.1.10
255.0.0.0
0.0.0.0
Director 2/140 Service Manual