HP storageworks director 2/140 Service Manual page 286

Information and Error Messages
Table 31: HAFM Messages (Continued)
The Domain ID was
not accepted. The
World Wide Name
and Domain ID must
be unique in the Fabric
Membership List.
The management
server is busy
processing a request
from another Element
Manager.
The link to the
managed product is
not available.
The maximum number
of aliases has already
been configured.
The maximum number
of management server
network addresses has
already been
configured.
The maximum number
of members has
already been
configured.
286
Message
You attempted to add
a detached switch to
the Fabric
Membership List
through the Fabric
Binding option
(SANtegrity Binding
feature), but a switch
already exists in the
fabric with the same
domain ID.
The HAFM appliance
is processing a request
from another instance
of an Element
Manager and cannot
perform the requested
operation.
The Ethernet
connection between
the HAFM appliance
and managed product
is down or
unavailable.
The maximum number
of aliases allowed was
reached.
The number of HAFM
appliance IP
addressees that can be
defined to the
application has
already been
configured.
The maximum number
of unique members is
4097. The maximum
number of members is
8192.
Description
Enter a unique domain ID for
the switch in the Add Detached
Switch dialog box.
Wait until the process
completes, then perform the
operation again.
Establish and verify the network
connection.
Delete an existing alias before
adding a new alias.
Delete an existing IP address
before adding a new address.
HAFM
Delete an existing zone
member before adding a new
zone member.
Action
Error Messages