Figure 6-40. The Reset Hub to Factory Default Option
Resetting the Hub to Factory Defaults in the Console
To reset the hub to factory defaults from the Hub Console Interface, perform
the following steps:
From the Main Menu, type 3 and press [Enter]. The Hub Console
1.
Interface displays the Hub Configuration Menu.
Type 5 and press [Enter]. The Hub Console Interface displays the
2.
following prompt:
CAUTION: about to apply factory default to the hub.
Console session will be lost if hub is factory
defaulted.
This will result in all information being cleared.
This includes the IP configuration. Continue(Y/[N]):
3.
Please consider whether you really want to reset the hub. If you do, you
will lose all your information that you have built up during multiple
configurations (for example, Port Security, Backup Links, Community
Names).
Configuration Reference
Resetting hub
parameters is a quick
way to remove current
configuration values to
start rebuilding your
hub's profile.
6-89