Set The Director Online Or Offline; Set Online State; Set Online State Dialog Box (Offline); Set Online State Dialog Box (Online) - HP storageworks director 2/140 Service Manual

Repair Information

Set the Director Online or Offline

This section describes procedures to set the director online or offline. These
operating states are described as follows:
Note:
devices is disrupted. Do not set the director offline unless directed to do so by a
procedural step or the next level of support.

Set Online State

To set the director online:
1. Open the HAFM application. The View All - HAFM 8 main window displays.
2. Double-click the icon representing the director to be set online. The
3. Choose Maintenance > Set Online State. If the director is offline, the Set
Figure 52: Set Online State dialog box (offline)
4. Click Set Online. A Warning dialog box displays, indicating the director will
5. Click OK. As the director comes online, observe the Element Manager. The
200
Online—When the director is set online, an attached device can log in to the
director if the port is not blocked. Attached devices can communicate with
each other if they are configured in the same zone.
Offline—When the director is set offline, all ports are set offline. The director
transmits the offline sequence (OLS) to attached devices, and the devices
cannot log in to the director.
When the director is set offline, the operation of attached Fibre Channel
Hardware View for the selected director displays.
Online State dialog box displays, as shown in
OFFLINE.
be set online.
State field of the Director 2/140 Status table displays Online.
Figure 52, indicating the state is
Director 2/140 Service Manual