Viewing The Port List Page - HP storageworks director 2/140 Service Manual

Viewing the Port List Page

When the EWS interface opens, the View panel displays as the default. To view
the Port List page, perform the following:
1. At the View panel, choose the Monitor option at the left side of the panel.
Figure 44: Monitor panel (Port List page)
A row of information for each port (0 through 139 inclusive) appears. Each row
consists of the following columns:
Director 2/140 Service Manual
The Monitor panel displays with the Port List page open, as shown in
Figure 44.
Port #—The director port number.
Name—The port name of 24 alphanumeric characters or less. The name
typically characterizes the device or fabric element to which the port is
attached.
Block Configuration—Indicates if a port is blocked or unblocked. Blocking
a port prevents the attached devices or fabric element from communicating. A
blocked port continuously transmits the offline sequence (OLS).
State—Port state (Online, Offline, Not Installed, Inactive, Invalid
Attachment, Link Reset, No Light, Not Operational, Port Failure,
Segmented E_Port, or Testing).
Type—The type of port (G_Port if nothing is attached to the port, F_Port if a
device is attached to the port, and E_Port if the port is connected to another
director or switch as part of an ISL).
Repair Information
179