Viewing The Performance View - HP storageworks director 2/140 Service Manual

Double-click anywhere in a row for an installed port to open the Port Properties
dialog box.
Right-click anywhere in a row for an installed port to open a menu to:

Viewing the Performance View

To view performance data, perform the following:
1. At the Hardware View, click the Performance tab. The Performance View
Director 2/140 Service Manual
Operating Speed—The operating speed of the port (Not Established, 1, or 2
Gb/sec.).
Alert—If Link Incident (LIN) alerts are configured for the port through the
Configure Ports dialog box, a yellow triangle displays in the column when a
link incident occurs. A yellow triangle also displays if beaconing is enabled
for the port. A red and yellow diamond displays if the port fails.
Open the Port Properties, Node Properties, or Port Technology dialog boxes.
Block or unblock the port.
Enable or disable port beaconing.
Perform port diagnostics.
Enable or disable port channel wrapping. This menu option displays only
when the director is configured for FICON management style.
Swap one Fibre Channel port address with another. This menu option displays
only when the director is configured for FICON management style.
Clear link incident alerts.
Reset the port.
Configure port binding.
Clear threshold alerts.
displays, as shown in Figure 41.
Repair Information
171