Bytes 8 Through 11 Failure Reasons And Actions - HP storageworks director 2/140 Service Manual

Table 19: Bytes 8 through 11 Failure Reasons and Actions
Bytes 8 - 11
01
08
09
0A
F0
F1
F2
24
A zone merge failed during ISL initialization. The following list explains the
reason:
Disconnect the fiber optic jumper cable from the E_Port reporting the problem,
then reconnect the cable to the same port.
Did disconnecting and reconnecting the cable solve the problem and was the
resulting zone merge successful?
NO
↓
Perform the data collection procedure and return the CD to HP for analysis.
Contact the next level of support. Exit MAP.
Director 2/140 Service Manual
Invalid data length.
Invalid zone set format.
Invalid data.
Cannot merge.
Retry limit reached.
Invalid response length.
Invalid response code.
Failure reason 01—An invalid data length condition caused an error in a
zone merge frame.
Failure reason 08—An invalid zone set format caused an error in a zone
merge frame.
Failure reason F0—A retry limit reached condition caused an error in a zone
merge frame.
Failure reason F1—An invalid response length condition caused an error in
a zone merge frame.
Failure reason F2—An invalid response code caused an error in a zone
merge frame.
YES
The merged zone is operational. Exit MAP.
Failure Reason
Diagnostics
Action
Go to step 24
Go to step 24
Go to step 25
Go to step 25
Go to step 24
Go to step 24
Go to step 24
151