HP storageworks director 2/140 Service Manual page 293

Table 32: Element Manager Messages (Continued)
Another Element
Manager is currently
performing a firmware
install.
Are you sure you want
to delete firmware
version?
Are you sure you want
to delete this address
configuration?
Are you sure you want
to send firmware
version?
Cannot change Port
Type while
Management Style is
FICON without
SANtegrity feature.
Please contact your
sales representative.
Cannot disable Switch
Binding while
Enterprise Fabric
Mode is active and the
switch is Online.
Director 2/140 Service Manual
Message
Only one instance of
the Element Manager
can install a firmware
version to the director
at a time.
This message requests
confirmation to delete
a firmware version.
Firmware library can
store up to 8 firmware
versions.
Confirmation to delete
the selected address
configuration.
This message requests
confirmation to send a
firmware version from
the HAFM appliance's
firmware library to the
director. Firmware
library can store up to
8 firmware versions.
Firmware is below the
required level and you
attempted to change a
port type in the
Configure Ports dialog
box while FICON
management style, but
the optional
SANtegrity Binding
feature is not installed.
You attempted to
disable Switch Binding
through the Switch
Binding Change State
dialog box, but
Enterprise Fabric
Mode is enabled.
Description
Wait for the firmware
installation process to complete
and try the operation again.
Click Yes to delete the firmware
version or No to abort the
operation.
Click Yes to confirm the
deletion of the address
configuration or No to cancel
the operation.
Click Yes to send the firmware
version or No to abort the
operation.
Informational message. If the
firmware is below the required
level, install SANtegrity Binding
before changing port types in
the Configure Ports dialog box
while in FICON management
style.
You must either disable
Enterprise Fabric Mode using
the Enterprise Fabric Mode
dialog box in the
application or set the switch
offline before you can disable
Switch Binding.
Information and Error Messages
Action
HAFM
293