Unblock A Upm Card - HP storageworks director 2/140 Service Manual

Repair Information
2. Double-click the icon representing the director for which a port will be
3. Double-click the UPM card for which a port will be unblocked. The Port
4. Move the mouse pointer over the port to be unblocked and right-click the
5. Choose Block Port. Note the check mark in the box adjacent to the menu
Figure 56: Unblocking Port warning box
6. Click OK. The following occur to indicate the port is unblocked (and online):
7. Click Back to Full View to return to the Hardware View.

Unblock a UPM Card

To unblock all four ports on a director UPM card:
1. Open the HAFM application. The View All - HAFM 8 main window displays.
2. Double-click the icon representing the director for which a UPM card will be
3. Double-click the UPM card to be unblocked. The Port Card View for the
4. Move the mouse pointer over the UPM card to be unblocked (but not over an
5. Choose Unblock All Ports. The Unblock All Ports dialog box displays, as
204
unblocked. The Hardware View for the selected director displays.
Card View for the selected card displays.
mouse to open a list of menu options.
item, indicating the port is blocked. The Unblocking Port warning box
displays, as shown in
— The emulated green LED associated with the port illuminates at the Port
Card View.
— The green LED associated with the port illuminates at the director.
— The check box adjacent to the Block Port option becomes blank.
unblocked. The Hardware View for the selected director displays.
selected card displays.
individual port) and right-click the mouse to open a list of menu options.
shown in Figure 57.
Figure 56.
Director 2/140 Service Manual