HP storageworks director 2/140 Service Manual page 191

4. Click Maintenance and choose Swap Ports. The Swap Ports dialog box
5. Enter the logical port addresses (in hexadecimal format) of the pair of ports to
6. Choose the Unblock after swap check boxes to unblock the ports when the
7. Click Next. At the Swap Ports dialog box, the message Continuing this
8. Click Next. At the Swap Ports dialog box, the message Move the port
9. Swap the fiber optic jumper cables between the selected ports, then click
10. At the Swap Ports dialog box, the message Ports swapped
Director 2/140 Service Manual
displays.
be swapped at the First address and Second address fields. The ports are
automatically blocked during the procedure.
procedure completes.
procedure requires varying the selected ports
offline. Ask the system operator to vary the link(s)
offline, then press Next. displays.
cable(s). Then press Next. displays.
Next.
successfully. displays. Click Next to close the window and return to the
Hardware View.
Repair Information
191