Table 31: HAFM Messages (Continued)
Zoning by port
number is not
supported in Open
Fabric Mode.
Zoning name already
exists.
Director 2/140 Service Manual
Message
You cannot specify an
item for zoning by port
number if
Open Fabric Mode.
Duplicate zone names
are not allowed in the
zoning library.
Description
Either define zones by WWN
of device or change to
HAFM
is in
Homogeneous Fabric mode in
the Configure Operation Mode
dialog box of the Element
Manager.
Modify (to make it unique) or
delete the duplicate zone
name.
Information and Error Messages
Action
291