HP storageworks director 2/140 Service Manual page 208

Repair Information
2. Open the HAFM application. The View All - HAFM 8 main window displays.
3. Double-click the icon representing the director to which the firmware version
4. Choose Maintenance > Firmware Library. The Director 2/140 Firmware
5. Click New. The New Firmware Version dialog box displays, as shown in
Figure 59: New Firmware Version dialog box
6. Select the desired firmware version file (downloaded in
Figure 60: New Firmware Description dialog box
7. Enter a description (up to 24 characters in length) for the new firmware
208
d. Ensure the correct directory path is specified at the Save in field and the
correct file is specified in the File name field. Click Save. The new
firmware version is downloaded and saved to the HAFM appliance or PC
hard drive.
e. If the new firmware version was downloaded to a PC (not the HAFM
appliance), transfer the firmware version file to the HAFM appliance by
backup disk, CD-ROM, or other electronic means.
will be added. The Hardware View for the selected director displays.
Library dialog box displays, as shown in
Figure 59.
HAFM appliance CD-ROM or hard drive. Ensure the correct directory path
and filename display in the File name field and click Save. The New
Firmware Description dialog box displays, as shown in
version and click OK. It is recommended the description include the
installation date and text that uniquely identifies the firmware version.
Figure 58.
step 1) from the
Figure
Director 2/140 Service Manual
60.