HP storageworks director 2/140 Service Manual page 100

Diagnostics
2. After a few seconds, the LCD panel displays the following, as shown in
LAN 2:
010.001.001.001
Figure 22: LCD panel (LAN 2 IP address)
3. Depending on switch-to-server LAN connectivity, record the appropriate IP
Continue to the next step.
20
Configure the HAFM appliance reporting the Duplicate Session communication
problem as a client.
1. At the HAFM main window, choose SAN > Logout. The HAFM 8 Log In
2. Enter the HAFM appliance IP address in the Network Address field. If you
3. Enter your user ID and password in the User ID and Password fields. User
4. If you want your computer to save the login information, choose the Save
5. Click Login. The View All - HAFM 8 window displays, as shown in
100
Hard disk capacity.
Virtual and physical memory capacity.
Figure 22.
address (LAN 1 or LAN 2).
dialog box displays.
are logging in to the local HAFM appliance, the network address is localhost.
The default address that displays in the Network Address field is the address
of the last appliance accessed. Click the Network Address drop down list to
see the network addresses of all HAFM appliances that were accessed from
the computer you are logged in to.
If you want to connect to an HAFM appliance that is not listed, enter the IP
address in the Network Address field.
IDs and passwords are case-sensitive.
Password option.
Figure 10.
Director 2/140 Service Manual