Restore The Configuration; Reset Configuration Data - HP storageworks director 2/140 Service Manual

Repair Information
Figure 65: Backup Complete dialog box
5. Click OK to close the dialog box and return to the Hardware View.

Restore the Configuration

To restore the director configuration file from the HAFM appliance:
1. Notify the customer the director will be set offline. Ensure the customer's
2. Set the director offline
3. Open the HAFM application. The View All - HAFM 8 main window displays.
4. Double-click the icon representing the director for which the configuration
5. Choose Maintenance > Backup & Restore Configuration. The Backup and
6. Click Restore. A Warning message box displays, as shown in
Figure 66: Warning dialog box
7. Click Yes. When the restore process finishes, the Restore Complete dialog
8. Click OK to close the dialog box and return to the Hardware View.

Reset Configuration Data

Note:
and may disrupt HAFM appliance-to-director communication. All configured feature
(PFE) keys must be re-entered.
214
system administrator quiesces Fibre Channel frame traffic through the
director and sets attached devices offline.
file will be restored. The Hardware View for the selected director displays.
Restore Configuration dialog box displays, as shown in
box displays.
This procedure resets the director IP address to the default value of 10.1.1.10
("Set Offline State" on page 201).
Figure 64.
Figure 66.
Director 2/140 Service Manual