Map 0600: Port Operational And Led States - HP storageworks director 2/140 Service Manual

Table 13: MAP 0600: Port Operational and LED States
Operational State
Offline
Not Operational
Testing
Testing
Beaconing
Invalid Attachment
Link Reset
Link Incident
Segmented E_Port
13
A link incident may have occurred, but the LIN alerts option is not enabled for the
port and the attention indicator does not display.
At the Hardware View, choose Logs > Link Incident Log. The Link Incident
Log displays. If a link incident occurred, the affected port number is listed with
one of the following messages.
Director 2/140 Service Manual
Link interface incident-implicit incident.
Link interface incident-bit-error threshold exceeded.
Link failure-loss of signal or loss of synchronization.
Link failure-not-operational primitive sequence (NOS) received.
Link failure-primitive sequence timeout.
Link failure-invalid primitive sequence received for the current
link state.
Green LED Amber LED
Off Off
Off Off
Off Blinking
On Blinking
Off or On Blinking
On Off
Off Off
Off Off
On Off
Diagnostics
Action
Go to step 16
Go to step 16
Internal loopback test in
process.
Exit MAP.
External loopback test
in process.
Exit MAP.
Go to step 17
Go to step 19
Go to step 32
Go to step 33
Go to MAP 0700:
Fabric, ISL, and
Segmented Port
Problem Determination.
121