Tools Supplied By Service Personnel; Fiber Optic Protective Plug; Null Modem Cable - HP storageworks director 2/140 Service Manual

Figure 6: Fiber optic protective plug
Figure 7: Null modem cable

Tools Supplied by Service Personnel

The following tools are expected to be supplied by service personnel performing
director maintenance actions. Use of the tools may be required to perform one or
more test, service, or verification tasks.
Director 2/140 Service Manual
Null modem cable—An asynchronous RS-232 null modem cable
is required to configure director network addresses and acquire Event Log
information through the maintenance port. The cable has nine conductors and
has DB-9 male and female connectors.
Scissors or pocket knife—A sharp cutting edge (scissors or knife blade) may
be required to cut the protective strapping when unpacking replacement
FRUs.
Standard flat-tip and cross-tip (Phillips) screwdrivers—Screwdrivers are
required to remove, replace, adjust or tighten various FRUs, chassis, or
cabinet components.
General Information
(Figure 7)
31