HP storageworks director 2/140 Service Manual page 170

Repair Information
Figure 40: Port List View
The Port List View provides status information in the following columns:
170
#—The director port number (0 through 139 inclusive).
Addr—The director logical port address in hexadecimal format (FICON
management style only).
Name—The port name configured through the Configure Ports dialog box.
Block Config—The port status (Blocked or Unblocked).
State—The operating state of the port. Valid states are:
— Online, Offline, or Testing
— Beaconing
— Invalid Attachment
— Link Incident or Link Reset
— No Light, Not Operational, or Port Failure
— Segmented E_Port
Type—The type of port. Valid port types are a generic port (G_Port) not
connected to a Fibre Channel device, director, or switch (therefore light is not
transmitted); a fabric port (F_Port) connected to a device; or an expansion
port (E_Port) connected to a director or switch to form an interswitch link
(ISL).
Director 2/140 Service Manual