Viewing Port Properties - HP storageworks director 2/140 Service Manual

Viewing Port Properties

To open the Port Properties dialog box, perform the following:
1. Double-click a port graphic at the Hardware View or a port row at the Port
Figure 42: Port Properties dialog box
The Port Properties dialog box provides the following information:
Note:
Threshold %, displays in the Port Properties dialog box.
Director 2/140 Service Manual
— Flows rerouted to and from ISLs.
List View. The Port Properties dialog box displays, as shown in
If the Open Trunking feature is installed, an additional item, Congested
Port Number—The director port number (0-127 and 132-143 inclusive).
Port Name—The user-defined name or description for the port.
Type—The Port type (G_Port, F_Port, or E_Port) type of port (G_Port if
nothing is attached to the port, F_Port if a device is attached to the port, and
E_Port if the port is connected to another director or switch as part of an ISL).
Operating Speed—The operating speed of the port (Not Established,
1 Gbps, or 2 Gbps.).
Port WWN—The Fibre Channel WWN for the director port.
Repair Information
Figure 42.
175