HP storageworks director 2/140 Service Manual page 91

3. After successful POST completion, the LCD panel displays a Welcome!!
4. After rebooting the appliance at the LCD panel, log on to the HAFM
5. Enter the HAFM appliance IP address in the Network Address field. If you
6. Enter your user ID and password in the User ID and Password fields. User
7. If you want your computer to save the login information, choose the Save
8. Click Login. The View All - HAFM 8 window displays, as shown in
Director 2/140 Service Manual
d. Ignore the message. After ten seconds, the appliance performs the boot
sequence from the basic input/output system (BIOS). During the boot
sequence, the appliance performs additional POST tests and displays the
following operational information at the LCD panel:
— Host name.
— System date and time.
— LAN 1 and LAN 2 IP addresses.
— Fan 1, fan 2, fan 3, and fan 4 rotational speed.
— Central processing unit (CPU) temperature.
— Hard disk capacity.
— Virtual and physical memory capacity.
message, then continuously cycles through and displays appliance operational
information.
appliance Windows 2000 desktop through a LAN connection to a
browser-capable PC. The HAFM application starts and the HAFM 8 Log In
dialog box displays, as shown in
are logging in to the local HAFM appliance, the network address is localhost.
The default address that displays in the Network Address field is the address
of the last appliance accessed. Click the Network Address drop down list to
see the network addresses of all HAFM appliances that were accessed from
the computer you are logged in to.
If you want to connect to an HAFM appliance that is not listed, enter the IP
address in the Network Address field.
IDs and passwords are case-sensitive.
Password option.
Figure 10.
Figure 9.
Diagnostics
91