HP storageworks director 2/140 Service Manual page 382

Event Code Tables
Message: SBAR assembly revision not supported.
Severity: Minor.
Explanation: The indicated SBAR assembly is not recognized and displays as uninstalled to the
director firmware.
Action: Ensure the director model supports the operating firmware version. If the firmware
version is supported, replace the SBAR assembly with a functional assembly.
Perform the data collection procedure and return the backup CD and faulty
assembly to HP support personnel.
Event Data: Byte 0 = SBAR slot position (00 or 01).
Bytes 4 through 7 = elapsed millisecond tick count.
Bytes 8 and 9 = detected module identifier.
Distribution: Director
EWS
Event
Log
Message: Director contains no operational SBAR assemblies.
Severity: Severe.
Explanation: The director firmware does not recognize an installed SBAR assembly.
Action: Install at least one functional SBAR assembly and power-on reset (POR) the
director.
Event Data: Bytes 4 through 7 = elapsed millisecond tick count.
Distribution: Director
EWS
Event
Log
382
Event Code: 605
HAFM appliance
System Event
Error Log
LED
Event Code: 607
HAFM appliance
System Event
Error Log
LED
E-Mail Call
Home
E-Mail Call
Home
Director 2/140 Service Manual
Host
Sense Link
Info Incident
Host
Sense Link
Info Incident