HP storageworks director 2/140 Service Manual page 50

Hide thumbs Also See for storageworks director 2/140:
Table of Contents

Advertisement

Diagnostics
Is the director powered on?
YES
9
At the director, inspect the amber LED at the top of each CTP card.
Is the amber LED illuminated on both CTP cards?
NO
10
A director-to-HAFM appliance Ethernet link failure is indicated.
Go to
0400: Loss of HAFM Appliance or Web Browser PC
page 92. Exit MAP.
11
Does a red diamond with yellow background (failure indicator) display as the
background to the icon representing the director reporting the problem?
YES
12
Double-click the icon representing the director reporting the problem. The
Hardware View displays. At the Hardware View:
50
An illuminated green LED on the active CTP card, and illuminated green
PWR OK LEDs on both power supplies.
Audio emanations and airflow from cooling fans.
NO
A power distribution problem is indicated. Go to
event codes. If no event codes are found, go to
Distribution
YES
Failure of both CTP cards is indicated. Event codes are not recorded.
Go to
"MAP 0500: FRU Failure
step 23
to obtain event codes. If no event codes are found, go to
NO
Go to
step
14.
Observe the director Status table is yellow and the director status is NOT
OPERATIONAL.
Inspect FRUs for a blinking red and yellow diamond (failed FRU indicator)
that overlays the FRU graphic.
Analysis" on page 69. Exit MAP.
Analysis" on page 107. Exit MAP.
step 23
to obtain
"MAP 0100: Power
"MAP
Communication" on
Director 2/140 Service Manual

Advertisement

Table of Contents
loading

Table of Contents