HP storageworks director 2/140 Service Manual page 139

Table 16: MAP 0700: Event Codes (Continued)
Event Code
3
Is fault isolation being performed at the HAFM appliance?
YES
↓
4
Does a yellow triangle (attention indicator) display over a UPM card graphic at
the Hardware View?
YES
↓
5
Inspect the port state and LED status for all ports with an attention indicator.
1. At the Hardware View, double-click the port graphic with the attention
2. Inspect the Operational State field at the Port Properties dialog box.
Director 2/140 Service Manual
052 HAFM appliance internal error.
060 Fabric controller unable to synchronize
databases.
061 Fabric controller database invalid.
062 Maximum interswitch hop count exceeded.
063 Received link state record too large.
070 E_Port is segmented.
071 Director is isolated.
072 E_Port connected to unsupported switch.
140 Congestion detected on an ISL.
142 Low BB_Credit detected on an ISL.
150 Zone merge failure.
NO
Fault isolation is being performed through the Embedded Web Server
interface. Go to
NO
The problem is transient and the director-to-fabric element
connection is operational. Exit MAP.
indicator. The Port Properties dialog box displays.
Explanation
step 26.
Diagnostics
Action
Go to step 8
Go to step 9
Go to step 9
Go to step 10
Go to step 11
Go to step 12
Go to step 12
Go to step 13
Go to step 21
Go to step 26
Go to step 27
139