Director 2/140 Service Manual
c. Highlight the entry representing the reset director in the Available
Addresses window and click Remove.
d. At the Discover Setup dialog box, click OK. The director is no longer
defined to the HAFM appliance.
e. Change a director IP address through the maintenance port, refer to hp
StorageWorks Director 2/140 Installation Guide for more information.
f.
Identify the switch to the HAFM application, refer to hp StorageWorks
Director 2/140 Installation Guide for more information.
g. Director-to-HAFM appliance communication is restored and the
procedure is complete.
Repair Information
217