Configure Switch Parameters Dialog Box - HP storageworks director 2/140 Service Manual

Diagnostics
7. Set both directors online
Did the operating parameter change solve the problem and did both directors join
through the ISL to form a fabric?
NO
↓
Contact the next level of support. Exit MAP.
15
A director E_Port segmented because two fabric elements had duplicate domain
IDs.
1. Work with the system administrator to determine the desired domain ID
2. Notify the customer that both directors will set offline. Ensure the system
3. Set both directors offline
4. At the Hardware View for the first director reporting the problem, choose
Figure 36: Configure Switch Parameters dialog box
5. Type the customer-determined preferred domain ID value, then click
6. Repeat
7. Set both directors online
144
YES
The directors, associated ISL, and multi-switch fabric are operational.
Exit MAP.
(1 through 31 inclusive) for each director.
administrator quiesces Fibre Channel frame traffic through the directors and
sets attached devices offline.
Configure > Operating Parameters > Switch Parameters. The Configure
Switch Parameters dialog box displays, as shown in
Activate.
step 4 and step 5
the segmented E_Port (second director). Use a different preferred domain ID
value.
("Set Online State" on page 200).
("Set Offline State" on page 201).
at the Hardware View for the director attached to
("Set Online State" on page 200).
Figure 36.
Director 2/140 Service Manual