Add A Firmware Version - HP storageworks director 2/140 Service Manual

4. The firmware version displays at the lower left corner of the dialog box in
5. Click Close to return to the Hardware View.

Add a Firmware Version

The firmware version shipped with the director is provided on the HP
StorageWorks Director Documentation Kit CD. Subsequent firmware versions to
upgrade the director are provided to customers through the HP website.
Note:
Notes that accompany the firmware version. This information supplements information
provided in this general procedure.
To add a director firmware version to the library stored on the HAFM appliance
hard drive:
1. Obtain the new firmware version from the HP website:
Note:
Note:
customer or next level of support.
Director 2/140 Service Manual
XX.YY.ZZ format, where XX is the version level, YY is the release level,
and ZZ is the patch level.
When adding a firmware version, follow procedural information in Release
The following path is subject to change.
a. At the HAFM appliance or other personal computer (PC) with Internet
access, open the HP website. The uniform resource locator (URL) is:
http://h18006.www1.hp.com/storage/saninfrastructure.html
If required, obtain the customer-specific member name and password from the
b. Follow links to HAFM software.
c. Click the Director 2/140 Firmware Version XX.YY.ZZ entry, where
XX.YY.ZZ is the desired version. The Windows 2000 Save As dialog
box displays.
Repair Information
207