Additional Information - HP storageworks director 2/140 Service Manual

General Information

Additional Information

The following Director 2/140 documents provide additional information:
32
®
T10 Torts tool—The tool is required to rack-mount the director or to
remove, replace, adjust, or tighten various chassis or cabinet components.
Electrostatic discharge (ESD) grounding cable with attached wrist
strap—Use of the ESD wrist strap is required when working in and around
the director card cage.
Maintenance terminal (desktop or notebook PC)—The PC is required to
configure director network addresses and acquire Event Log information
through the maintenance port. The PC must have:
— The Microsoft Windows 98, Windows 2000, Windows XP, or Windows
Millennium Edition operating system installed.
— RS-232 serial communication software installed, such as ProComm Plus
or HyperTerminal. HyperTerminal is provided with Windows operating
systems.
Fiber optic cleaning kit—The kit contains tools and instructions to clean
fiber optic cable, connectors, loopback plugs, and protective plugs.
For detailed information about Director 2/140 front and rear panel features,
field replaceable units (FRUs), management options and operational features,
installation, configuration, and technical specifications, refer to the
HP StorageWorks Director 2/140 Installation Guide.
For information on managing the Director 2/140 using HAFM and the
Element Manager, refer to the HP StorageWorks Director Element Manager
User Guide.
Director 2/140 Service Manual