Discover Setup Dialog Box; Domain Information Dialog Box - HP storageworks director 2/140 Service Manual

Repair Information
Figure 68: Discover Setup dialog box
Figure 69: Domain Information dialog box
10. Change the director IP address and restart the HAFM appliance session as
216
c. At the HAFM application, choose Discover > Setup. The Discover Setup
dialog box displays, as shown in
d. Highlight the entry representing the reset director in the Available
Addresses window and click Change. The Domain Information dialog
box displays, as shown in
e. Enter 10.1.1.10 in the IP Address field and click OK. Entries at the
Discover Setup dialog box reflect the new IP address.
f. At the Discover Setup dialog box, click OK. Director-to-HAFM
appliance communication is restored and the procedure is complete.
follows:
a. A grey square with a yellow exclamation mark displays adjacent to the
icon representing the reset director, indicating director is not
communicating with the HAFM appliance.
b. Delete the icon representing the reset director. At the HAFM application,
choose Discover > Setup. The Discover Setup dialog box displays, as
shown in Figure
Figure
Figure 69.
68.
68.
Director 2/140 Service Manual