Send Firmware Dialog Box - HP storageworks director 2/140 Service Manual

2. Before downloading firmware version XX.YY.ZZ to a director, ensure that
3. Double-click the icon representing the director to which the firmware version
4. As a precaution to preserve director configuration information, perform the
5. Choose Maintenance > Firmware Library. The Director 2/140 Firmware
6. Select the firmware version to be downloaded and click Send. The send
Figure 62: Send Firmware dialog box
7. Click Yes. The Send Firmware dialog box displays.
Director 2/140 Service Manual
the required version of the HAFM application, as described in the firmware
release notes, is running on the HAFM appliance.
a. Choose Help > About. The About dialog box displays and lists the
HAFM application version. Click OK to close the dialog box.
b. If required, install the correct version of the HAFM application
or Upgrade Software" on page 218).
will be downloaded. The Hardware View for the selected director displays.
data collection procedure
Library dialog box displays, as shown in
function verifies existence of certain director conditions before the download
process begins.
If an error occurs, a message displays, indicating the problem must be fixed
before firmware is downloaded. Conditions that terminate the process
include:
— A redundant CTP card failure.
— The firmware version is being installed to the director by another user.
— The director-to-HAFM appliance link is down.
If a problem occurs and a corresponding message displays, go to
Start MAP" on page 45 to isolate the problem. If no error occurs, the Send
Firmware confirmation box displays, as shown in
As the download begins, a Writing data to FLASH message displays
at the top of the dialog box, followed by a Sending Files message. This
message remains as a progress bar travels across the dialog box to show
("Collecting Maintenance
Figure
Repair Information
("Install
Data" on page 192).
58.
"MAP 0000:
Figure 62.
211