HP storageworks director 2/140 Service Manual page 279

Table 31: HAFM Messages (Continued)
Fabric member could
not be found.
Fabric not persisted.
Field cannot be blank.
File transfer aborted.
HAFM error <error
number 1 through 8 >.
Management server
could not log you on.
Verify your username
and password.
Management server is
shutting down.
Connection will be
terminated.
Invalid character in
field.
Director 2/140 Service Manual
Message
A fabric member does
not exist when the
application prepared
to find a route, find a
route node, or gather
route information on
that fabric member.
You attempted to
refresh or clear the
log, after a fabric was
unpersisted. When
you unpersist a fabric,
the corresponding
fabric log is deleted.
The data field requires
an entry and cannot
be left blank.
You aborted the file
transfer process.
The
encountered an
internal error (1
through 8 inclusive)
and cannot continue
operation.
An incorrect username
or password (both
case sensitive) was
used while attempting
to log in to the
application.
The
is closing and
terminating
communication with
the attached product.
An invalid character
was entered in the
data field.
Description
HAFM
application
HAFM
HAFM
application
Information and Error Messages
Action
Ensure the product is
incorporated into the fabric
and retry the operation. If the
problem persists, contact the
next level of support.
Click OK to continue. Ensure
the fabric is persisted before
attempting to refresh or clear
the Fabric Log.
Enter appropriate information
in the data field.
Verify the file transfer is to be
aborted, then click OK to
continue.
Contact the next level of
support to report the problem.
Verify the username and
password with the customer's
network administrator and
retry the operation.
Reboot the HAFM appliance. If
the problem persists, contact
the next level of support.
Remove invalid characters from
the entry.
279